Clarke CMD10 Specifications download pdf (Page 5)

14. ALWAYS wear proper apparel. Loose clothing or jewellery

may get caught in moving parts. Wear protective hair

covering to contain long hair.

15. ALWAYS use recommended accessories, the use of improper

accessories could be hazardous.

16. ALWAYS remove plug from electrical outlet when adjusting,

changing parts, or working on the machine.

17. NEVER operate machine while under the influence of drugs, alcohol or any medication.

18. NEVER leave machine running unattended. Turn power off.

Do not leave the machine until it comes to a complete stop.

19. NEVER force the machine, it will do a better and safer job at

the rate for which it was designed.

20. NEVER use power tools in damp or wet locations or expose

them to rain. Keep your work area well illuminated.

21. DO NOT use in explosive atmosphere (around paint,

flammable liquids etc.). Avoid dangerous environment.

Additional Precautions For Mill/Drills

1. ALWAYS use the appropriate cutter for the material being cut.

2. ALWAYS ensure the cutter is fully secured before use.

3. ALWAYS switch the machine OFF immediately the task is completed.

4. ALWAYS ensure safety guards etc., are in place and working correctly, if not DO NOT

use the machine until rectified.

5. DO NOT use the machine if the electric cable, plug or motor is in poor condition.

6. DO NOT allow the ventilation slots in the machine to become blocked.

7. DO NOT touch the cutter immediately after use, allow time for it to cool.

8. NEVER leave chuck keys in situ, Always remove and store safely when finished

tightening or loosening the chuck.

9. NEVER change from high to low speed and vice versa whilst the machine is still

running, always ensure the machine has come to a complete stop before doing so.

10. NEVER change from forward to reverse and vice versa whilst the machine is still

running, always ensure the machine has come to a full stop before doing so.

11. NEVER leave machine running unattended, ALWAYS ensure it is switched off and has

come to a complete stop before leaving it.

12. AVOID accidental starting, by switching off and isolating from the main electrical

supply by removing the plug from the socket.

Additionally, please keep these instructions in a safe place for future reference.

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Clarke CMD10 Specifications Page 5