Clarke CMD10 Specifications download pdf (Page 21)

21

3. Collet Set (MT3)

Part Number: 7610864

A set of 7 Collets for use with the HSS End

Mills:

Insert the appropriate Collet into the

spindle.

Insert the draw bolt, provided, into the

spindle, from the top and screw on to the

Collet a few turns.

Insert the appropriate Mill into the jaws of

the Collet, and tighten the draw bolt.

Hold the spindle by means of the tommy bar,

inserted in the hole in the side of the head,

and into the hole in the spindle.

To remove the Collet, unscrew the draw bolt

a few turns and tap its head with a mallet

to break the seal between the Collet and

spindle.

4. Quick Release Vice

Part Number: 7610868

‘T’ nuts are provided with the base machine

Maximum opening: 88mm

Effective Jaw size: 100x33mm

1 2 ... 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments