Clarke CMD10 Specifications download pdf (Page 22)

22

6. Clamp Set

Part Number: 7610872

5. Indexable Carbide End Mill

Part Number: 7910870

An example of how the clamp set may be used:

Select the appropriate studs and

slotted clamp. Screw the ‘T’ nut on

to the stud and assemble as

shown, using the appropriate

stepped blocks -

adjust the blocks

so that the clamp

is horizontal.

Simply insert the shank of the mill into the

spindle and screw on to the Draw Bolt.

Tighten using the Tommy Bar in the hole in

the side of the head, into the spindle, and

spanner on the Draw Bolt head.

Disassemble in the same manner as for the

drill chuck.

1 2 ... 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments