Clarke CMD10 Specifications download pdf (Page 20)

20

1. Mill Chuck Set

A set comprising 7 collets, a chuck and

‘C’spanner.

Collet sizes:

Part Number: 7610866

1. Insert the shank of the chuck into the Mill Head Spindle and screw on to the end of

the draw bolt. Tighten the draw bolt, holding the spindle steady by hand or by inserting

the tommy bar provided in the hole in the side of the head and into the spindle.

2. Unscrew and remove the end collar ‘A’, insert the appropriate collet and reattach

the end collar.

3. Insert the respective end mill into the collet and tighten the end collar using the ‘C’

spanner.

To remove the chuck, undo the draw bolt a turn or two, then tap its’ head using a mallet to break

the seal.

A

2. HSS End Mill (2-Fluted)

A set of 7 End Mills, of the following sizes,

for use with the Mill Chuck or Collet Set

•4 mm

•6 mm

•8 mm

• 10 mm

• 12 mm

• 14 mm

• 16 mm

Part Number: 7610874

Accessories

•4 mm

•6 mm

•8 mm

• 10 mm

• 12 mm

• 14 mm

• 16 mm

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments