Clarke RACER 9/50P Operations Instructions download pdf (Page 8)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

If the compressor has not been used for more then 24 hours, open the drain

valve (on the bottom of the reservoir) and drain any condensate which has

collected. See page 11.

MOVING THE AIR COMPRESSOR

• Stop the compressor and disconnect it from the power supply

before you move it.

• Always use the handle.

• Do not lift by (or put strain on) valves or hoses.

ATTACHING AIR TOOLS

1. Attach the air hose to the outlet

valve.

2. Attach the air tool to the other

nd of the air hose.

Turn the outlet valve handle to the

on position.

NOTE: The outlet valve is shown

without the air hose fitted for

clarity.

WARNING: BEFORE CONNECTING AIR TOOLS, MAKE SURE THAT YOU

READ THE INSTRUCTIONS SUPPLIED WITH THE TOOL, ALSO ENSURE THAT

THE TOOL IS SUITABLE FOR USE WITH THE COMPRESSOR AND HOSE

SPECIFICATIONS.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Clarke RACER 9/50P Operations Instructions Page 8