Clarke RACER 9/50P Operations Instructions download pdf (Page 16)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TROUBLESHOOTING

CAUTION: DO NOT TRY TO REPAIR OR ADJUST THIS COMPRESSOR IF YOU

ARE UNCERTAIN. IF YOU HAVE ANY QUERIES, CONTACT YOUR DEALER.

PROBLEM PROBABLE CAUSE REMEDY

The compressor

has stoppe

d and

does not start.

Bad electrical connections. 1. Check electrical connections.

2. Clean and tighten if necessary.

Overload cutout switch has

trippe

1. Switch off and wait approx 5

minutes.

2. Press the reset button and

swi

tch on again.

Motor windings burnt out. 1. Contact your Clarke dealer for

a replacemen

t motor.

The compressor

es not reach

the set pressure

and overheats

easily.

Compressor head gasket

blown or valve br

oken.

1. Return the machine to your

nearest service agent.

Compressor does

t start.

The reservoir has already fully

pressurised.

1. Open drain valve to expel air.

Compressor should start again

when pressure reduces.

Air leaking from

the

non-return

valve when the

compressor is not

running.

Faulty non-return valve. 1. Drain receiver completely of

air

2. Remove the valve end plug,

3. Carefully clean the valve seat

d the gasket

4. Reassemble.

Air pressure from

the re

gulator will

not adjust.

The diaphragm within the

regulator body is broken.

1. Replace regulator

The compressor is

ver

y noisy and

makes a metallic

knocking sound.

Compressor damaged and

eeds overhaul.

1. Return the machine to your

nearest service agent.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Clarke RACER 9/50P Operations Instructions Page 16

Comments to this Manuals

Related products and manuals for Air compressors Clarke RACER 9/50P