Clarke RACER 9/50P Operations Instructions download pdf (Page 10)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

REMOVING TOOLS FROM THE AIR HOSE

1. Push down on the On/Off button

to stop the compressor.

2. Turn the outlet valve handle to the

off position.

3. Operate the tool to depressurise

e air hose.

4. Disconnect the tool from the hose.

TURNING THE COMPRESSOR OFF

1. Follow steps 1-3 in “Removing Tools

From The Air Hose” above.

2. Disconnect the compressor from

the po

wer supply.

3. Slowly open the outlet valve to

depress

urise the reservoir.

• You will hear a hissing sound as

the reservoir depressurises.

4. Do not leave the compressor

unattended

if the reservoir is pressurised.

WARNING: ALWAYS SET THE PRESSURE REGULATOR TO ZERO BEFORE YOU

REMOVE OR REPLACE A TOOL.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Clarke RACER 9/50P Operations Instructions Page 10