Clarke RACER 9/50P Operations Instructions download pdf (Page 7)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

Before connecting your compressor to the power supply, check the following:-

• Set the ON/OFF switch to the

OFF position (pushed down).

• Make sure that the compressor

is on level ground.

• Make sure that the supply

voltage matches the voltage

shown on the data label.

CHECK THE OIL LEVEL

1. Remove the dipstick from the oil

reservoir.

Ensure the oil level is between the

min and max marks on the

dipstick.

• Only use SAE30 compressor oil,

available from your Clarke

dealer Part No. 3050801

• Take care not to exceed the

maximum mark.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Clarke RACER 9/50P Operations Instructions Page 7