Clarke RACER 9/50P Operations Instructions download pdf (Page 14)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

REPLACING THE DRIVE BELT

1. Rotate the clips shown through 90

degrees.

2. Remove the front of the cage

and take out

the worn or broken

drive belt.

Place the new drive belt over the

small wheel.

Position part of the drive belt over

the large belt wheel as shown.

5. Rotate the large belt wheel by

hand in a clockwise

direction

whilst guiding the belt on to the

wheel.

• Take care to avoid trapping

your fingers between the wheel

and belt.

6. Replace the cage and secure

before use.

NOTE: Never use the compressor with the guard removed.

WARNING: MAKE SURE THAT THE COMPRESSOR IS DISCONNECTED FROM

THE ELECTRICAL SUPPLY BEFORE REPLACING THE DRIVE BELT.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

Clarke RACER 9/50P Operations Instructions Page 14