Clarke Vantage 14 Operator's Manual download pdf (Page 14)

ENGLISH

12 Operator’s Manual - Vantage 13

MACHINE START AND STOP

55a

5c5d

5b 6

24a 24b

P100309

Starting the machine

Prepare the machine as shown in the previous paragraph.1.

Turn the parking lever (24, if equipped) to position (24a).2.

Drive the machine to the working place by pushing it with the hands on the handlebar (2).3.

Connect the power supply cable (10) to the electrical mains.4.

WARNING!

Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown on

the machine serial number plate (1), match the electrical mains voltage.

Turn the knob (5) to the suitable program.5.

(5a)• brushes - vacuum system - solution ﬂ ow activation

(5b)• brushes - solution ﬂ ow activation

(5c)• vacuum system activation

(5d)• ﬁ tted carpet cleaning and ﬂ oor wiping (optional)

Turn on the machine by pressing the switch (6) and start cleaning the ﬂ oor.6.

Stopping the machine

Turn off the machine by pressing the switch (6).7.

Disconnect the power supply cable (10) from the electrical mains.8.

Lift the brush by turning the transport/parking device (24, if equipped) to position (24b).9.

MACHINE OPERATION (SCRUBBING/DRYING)

Start the machine as shown in the previous paragraph.1.

While keeping both hands on the handlebar (2), move the machine and start scrubbing/drying the ﬂ oor.2.

CAUTION!

To avoid damaging the ﬂ oor surface, do not use the brushes without the solution and, when the machine is not

operating, stop the brush by pressing the program (5c or 5d), or by pressing the switch (6).

CAUTION!

Before lifting the brush, turn it off by pressing the switch (6).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

No comments

Clarke Vantage 14 Operator's Manual Page 14