Clarke ENCORE S2426 Operator's Manual download pdf (Page 6)

ENGLISH

Page -6- Clarke

Operator's Manual (EN) - Encore S2426 / L2426 / S2426 OBC / L2426 OBC

Procedures For Transporting

How to Put the Machine Into a Van or Truck

WARNING: This machine is heavy. Get

assistance before attempting

to transport or move it. Use

two able persons to move the

machine on a ramp or

incline. Always move slowly.

Do not turn the machine on a

ramp. Do not stop and leave

the machine on a ramp or

incline. The loading ramp

must be a minimum of 32"

wide.

WARNING: Machines can topple over if

guided over the edges of

stairs or loading docks and

cause injury or damage.

Stop and leave this machine

only on a level surface.

When you stop the machine,

put all switches into their

"OFF" position.

1. Make sure the loading ramp is at least eight

(8) feet (2.5m) long and a minimum of 32" (0.8m)

wide, and strong enough to support the machine.

2. Make sure the ramp is clean and dry.

3. Put the ramp in position.

4. Remove squeegee assembly, brush housing and

brush or pad driver before loading. Clarke

recommends that both the solution tank and

recovery tank are empty before loading.

5. Turn key switch "ON" (on "L" model only).

6. Align the machine on a level surface five (5) feet

(2 m) in front of the ramp.

7. Put the traverse knob at full speed (on "L" model

only).

8. For the" L" machine, push in either one of the

forward/reverse switches while pushing in the

white reverse switch. Back the machine up the

ramp. See figure 1.

9. For the "S" machine, push the machine back-

wards to the top of the ramp.

10. Turn the key switch "OFF".

Figure #1

1 2 3 4 5 6 7 8 9 10 11 ... 119 120

Comments to this Manuals

No comments

Clarke ENCORE S2426 Operator's Manual Page 6

Comments to this Manuals

Related products and manuals for Vacuum cleaners Clarke ENCORE S2426