Clarke Vantage 17 cable Operator's Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 90
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
ENGLISH
EN
6 Operator’s Manual - Vantage 17 Cable
The Vantage 17 Cable model of the Clarke scrubber-dryer ensures a highly effective floor cleaning performance. The Vantage
17 Cable model uses a single rotary brush to clean an area of 17.0 in (430 mm) in width. The rear squeegee performs the floor
cleaning and the vacuum system recovers the washing water in a single pass.
HOW TO KEEP THIS MANUAL
The Operator's Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that
can cause damage to it.
IDENTIFICATION DATA
The machine serial number and model are shown on the plate and can be read from the outside. (A, Fig. 2 - page 9).
The machine model year is written in the Declaration of Conformity and it is also indicated by the first two figures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification
data for any further reference.
CHANGES AND IMPROVEMENTS
KENT constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines previously sold.
Any change and/or addition of accessories must be approved and performed by Clarke.
UNPACKING
To unpack the machine carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of
visible damages, keep the packing and have it checked by the Carrier that delivered it. Call the Carrier immediately to fill in a
damage claim.
Please check that the following items have been supplied with the machine:
1. Technical documents:
Scrubber-dryer Operator’s Manual
2. Supply cable extension
INTRODUCTION
MACHINE Model ________________________
MACHINE serial number __________________
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 89 90

Comments to this Manuals

No comments