Clarke Vantage 17 cable Operator's Manual download pdf (Page 17)

ENGLISH

Operator’s Manual - Vantage 17 Cable 17

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.

Provided below is the Scheduled Maintenance Table. The intervals shown may vary according to particular working conditions,

which are to be defined by the person in charge of the maintenance.

This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance

procedures.

SCHEDULED MAINTENANCE TABLE

(1): and after the first 8 working hours

(2): for these maintenance operations, contact an authorized Clarke Service Center

INTEGRITY CHECK OF POWER SUPPLY CABLE AND EXTENSION

Carefully check if the power supply cable, the extension and the plugs are worn or damaged.

If necessary, have them replaced by the Service Center.

MAINTENANCE

WARNING: All maintenance operations must be performed by qualified personnel, or by an authorized

Service Center.

WARNING: Maintenance operations must be carried out:

– With the machine switched off

– With the power supply cable disconnected from the electrical mains

Moreover, read carefully the instructions in the Operator Safety Instructions chapter before

performing any maintenance operation.

Procedure

Daily or after

using the

machine

Weekly

Every six

months

Yearly

Integrity Check of Power Supply Cable and Extension

Squeegee Cleaning

Brush Cleaning

Cleaning of Tank and Vacuum Grid with Float

Squeegee Blade Check and Replacement

Solution Filter Cleaning

Screw and Nut Tightening Check z (1)

Vacuum Motor Carbon Brush Check or Replacement

z (2)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 89 90

No comments

Clarke Vantage 17 cable Operator's Manual Page 17