Clarke JET 8000 Instruction Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
GENERAL SAFETY RULES
1. High pressure water jets can be dangerous if subject to misuse. They must
not be directed at animals or people.
2. NEVER allow children or untrained personnel to use this product.
3. NEVER operate the power washer with any covers removed.
4. NEVER attempt any electrical or mechanical repairs to this power washer.
Always refer to your Clarke dealer.
5. NEVER supply any liquid other than water to the water inlet.
6. Never use the detergent facility to introduce flammable liquids/solvents,
e.g. paint thinners, petrol, oil due to risk of explosion.
7. ALWAYS release any residual pressure in the machine by turning off the
water supply and operating the trigger, before disconnecting the hose.
8. ALWAYS keep the pressure washer itself dry and clear of water spray.
9. Never direct the spray jet at the pressure washer itself or any other
electrical equipment.
10. ALWAYS wear protective clothing, safety shoes and safety glasses. Loose
particles & other debris may be propelled at high speed by the water jet.
11. ALWAYS hold the spray gun firmly & expect the gun to ‘kick’ when starting.
12. ALWAYS disconnect from the water supply and ensure the machine is
completely drained when not in use. Store in a cool dry location.
13. Only use chemical cleaning agents (detergents), that are approved for
pressure washers. CLARKE Traffic Film Remover or CLARKE Wash and Wax
(available from your dealer), are recommended.
14. ALWAYS disconnect from the electrical power supply and remove the plug
from the socket before carrying out any maintenance.
15. ONLY use original spare parts from the Clarke service department.
16. High pressure hoses, fittings and couplings are important for the
safety of the machine. Use only hoses, fittings and couplings
recommended by the manufacturer.
17. NEVER use the pressure washer if the power cable or other
important parts of the power washer are damaged.
18.If an extension cable is used, the cable and plug must be of
watertight construction. Inadequate extension cables can be
dangerous.
WARNING: WATER AT HIGH PRESSURE CAN BE DANGEROUS AND CAN
CAUSE DAMAGE IF THE OPERATOR IS CARELESS. NEVER ALLOW ANYONE
TO OPERATE THIS MACHINE UNLESS THEY ARE FAMILIAR WITH THE SAFETY
PRECAUTIONS.
Page view 2
1 2 3 4 5 6 7 8 ... 23 24

Comments to this Manuals

No comments