Clarke KING 135 User Manual

OPERATING & MAINTENANCEINSTRUCTIONS0702KING 135HOT WASHERPart No. 7320512KING 135HOT WASHER

HIGH and LOWPRESSURE is set bypulling IN or pushingOUT the nozzle asshown in Fig. 8.10NOTE: The detergent facility will ONLY operate at LOW PRESSUREB.

2SPECIFICATIONSMotor ... 230V 50hzPower Rating...

Thank you for purchasing this KING 135 Hot Washer.This machine is a lightweight, portable, high pressure power washer,designed for DIY and light comme

SAFETY PRECAUTIONSWARNINGWater at high pressure can be dangerous and may cause severedamage to persons or property if subject to misuse.NEVER allow an

14. Disconnect from the mains supply before carrying out anymaintenance or servicing.15. Never pull the washer by the power cable, or yank the cable i

ELECTRICAL CONNECTIONSWARNING: THIS MACHINE MUST BE EARTHED.This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, forconnect

ASSEMBLY AND PREPARATION FOR USEA 3/4” BSP adapter with a 1/2” hoseconnector is provided at the lowpressure water inlet, shown at B, Fig.3.Screw it on

IMPORTANT:Before use, ensure the water supply is of adequate volume for yourneeds, e.g., if you use a water butt - ensure it contains sufficient water

9OPERATIONA. COLD WASHMake certain the PUMP ON/OFF switch mounted on the side of the unit,(see Fig.3), is set in the ‘O’ OFF position.Connect the plug