Clarke JETSTAR 1750 Operations Instructions download pdf (Page 11)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

APPLYING CHEMICALS AND CLEANING AGENTS

To improve the cleaning performance, You can introduce chemical cleaning

agents (detergents) to the water jet using the detergent bottle and nozzle. This

is particularly useful when washing cars, greasy engine parts, removing oil

spots on concrete etc.

To prepare for detergent application,

1. Ensure the trigger lock is in the

locked position. and the machine

is switched OFF.

• It is not necessary to pull the

trigger to release the pressure.

2. Connect the Detergent Bottle

and Nozzle.

3. Unscrew the bottle from the

nozzle and fill with the required

detergent.

• Only use detergents

recommended for use with

pressure washers, such as

CLARKE Traffic Film Remover

which is a powerful low foaming agent for car cleaning, patio

cleaning etc., or CLARKE Wash & Wax, both available from your

CLARKE dealer.

4. When the container is filled with detergent, screw it back on to the nozzle

ensuring the plastic pick-up tube is in the fluid.

5. Switch ON the pressure washer, release the trigger lock and spray the

detergent onto the vehicle, patio etc.

• Allow the detergent a little time to work itself into the grime.

6. To rinse and clean, replace the Detergent Bottle and Nozzle with the

Pressure Washer Lance.

7. After using the detergent bottle and nozzle, rinse the complete assembly

(bottle and nozzle) thoroughly with clean water. (See Maintenance).

CAUTION: IF YOUR EYES COME INTO CONTACT WITH ANY CLEANING

FLUIDS, RINSE THEM IMMEDIATELY WITH PLENTY OF FRESH CLEAN WATER.

AND SEEK MEDICAL ADVICE IF REQUIRED.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

No comments

Clarke JETSTAR 1750 Operations Instructions Page 11