Clarke EXT 311 Operator's Manual download pdf (Page 36)

CLARKE TECHNOLOGY EXT 515 Operator's Manual Page 5

CONTROLS and MACHINE FEATURES

The Vacuum Motor Switch

The vacuum motor switch is on the back of the machine.

Put the switch in the "I" position to start the motor. Put

the switch in the "O" position to stop the motor.

The Switch To Activate The Pump

The switch to start/stop the pump motor is on the back

of the machine. Put the switch in the "I" position to start

the pump motor. Press the lever on the floor tool to

activate the pump. Release the levers on the floor to stop

the pump. Put the switch in the "O" position to stop the

pump motor.

NOTE: While the machine is in operation, the pump

will shut-off automatically when it reaches full

pressure. The pump will automatically turn on

when the pressure decreases.

The Float Shut-Off See figure 1

The float shut-off is in the recovery tank. When the liquid

raises the float, the air stops moving through the ma-

chine.

The Vacuum Hose Connector See figure 2

The vacuum hose connector is on the dome assembly.

The Solution Hose Connector See figure 3

The solution hose connector is on the lower part of the

extractor, below the vacuum hose connector.

The Recovery Tank

The recovery tank is in the top of the machine. Make sure

the white pail is in the tank when the machine is running.

The Solution Tank

The solution tank is in the top of the machine next to the

recovery tank.

Figure 1

Figure 2

Figure 3

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 56 57

No comments

Clarke EXT 311 Operator's Manual Page 36