Clarke IRD40 Specifications download pdf (Page 4)

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

GENERAL SAFETY PRECAUTIONS

GENERAL

1. ALWAYS read and ensure you fully understand the following precautions

and the hazards associated with this type of heater. Do not allow anyone

who has not read these instructions to operate this heater.

2. ALWAYS check for damage before using the heater. Check for breakages

and any other condition that may affect the function of the heater. Any

damage should be properly repaired or the part replaced. If in doubt, DO

NOT use the heater and consult your local Clarke dealer.

3. NEVER carry out any modifications to this product. If experiencing difficulty

of any kind consult your local dealer.

4. Use the heater in accordance with any applicable fire regulations.

WORK AREA

1. NEVER leave a heater plugged in without adult supervision if children or

animals are likely to be present.

2. Do not expose the heater or power cable to rain or wet conditions. Any

water entering the heater will increase the risk of electric shock.

3. NEVER use the heater where petrol, paint thinners or other highly

flammable vapour or where high levels of airborne dust may be present.

5. ONLY use in well ventilated areas. NEVER use the heater in living or

sleeping areas.

6. NEVER locate the heater facing combustible materials such as screens,

workshop furniture etc.

7. DO NOT locate the heater close to an adjacent wall or ceiling. Allow a

distance of at least 3 metres from a wall or ceiling. Avoid placing the

heater directly below socket outlets.

8. ALWAYS locate the heater on a level, flat, fireproof floor. Ensure that the

heater is correctly and safely positioned as described on page 8.

9. ALWAYS ensure that ample ventilation is present if the heater is being lit

following a long period without use.

10. Disconnect the heater from the power supply when not in use.

11. NEVER leave a heater unsupervised while operating - someone should

always be made responsible for monitoring it.

12. NEVER place anything on the burner.

13. NEVER move, handle, replenish the fuel supply or adjust the heater when it

is hot, or operating. Turn it off and wait for it to cool down first.

14. NEVER attach any duct work to the front of the heater.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Clarke IRD40 Specifications Page 4