Clarke CS4-6C Specifications download pdf (Page 9)

9

Clamping To Workbench

The belt and disc sander can be

clamped directly to the board using two

or more “G” clamps on base of unit (one

clamp on each end).

Installing Sanding Disc And Guard

1. Locate sanding disc and peel

backing from disc. Align perimeter of

disc with plate and press disc firmly

into position all the way around.

2. Locate disc guard and two M4 pan

head screws, from loose parts bag.

3. Position disc guard against lower 1/3

of disc aligning holes as shown.

4. Using a cross head type screwdriver,

fasten the pan head screws securely

applying slight pressure to thread the

holes.

Installing Work Support Stop

1. Locate the work support and M6 hex

screw, washer and lockwasher.

2. Hold work support into position and

fasten as shown. Do not overtighten.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Comments to this Manuals

No comments