Clarke IG1000 Specifications download pdf (Page 9)

CHECKING THE ENGINE OIL LEVEL

NOTE: Place the generator on a level surface and check the oil level as

follows.

1. Remove the left side maintenance panel.

Turn the oil filler cap anti-

clockwise and remove from the oil

reservoir, wipe the dipstick with a

clean cloth.

3. Insert the dipstick back into the oil

filler tube and then remove it

again. Do not screw in the oil filler

cap/dipstick when doing this.

Max Level

Min. Level

If the oil is below the Min. level on

the dipstick, add oil to the oil

reservoir.

• Oil Capacity (See

“Specifications

” on page 23)

• We recommend the use of

SAE30 oil in this generator.

• Do not tilt the generator when

adding engine oil. This could

result in overfilling and damage

to the engine.

5. Replace the oil filler cap.

WARNING: TO CARRY OUT THIS CHECK, SWITCH THE ENGINE OFF.

WARNING: TAKE CARE NOT TO TOUCH ANY HOT PARTS OF THE

GENERATOR WHEN CHECKING THE OIL LEVEL.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Clarke IG1000 Specifications Page 9