Clarke IG1000 Specifications download pdf (Page 8)

UNPACKING AND ASSEMBLY

Unpack your Generator and check to ensure the following items are present.

Should there be any deficiency or damage caused during transit contact

your Clarke dealer immediately.

• 1 x Inverter Generator

• 1 x Spark Plug Box Spanner

• 1 x Screwdriver/Tommy Bar

• 1 x Container with Spout for Oil Filling

• 1 x Operating & Instruction Manual

• 1 x 12V Battery Connector Lead

BEFORE USING THE GENERATOR

IMPORTANT: Generators should ALWAYS be earthed. Make sure you ground

(earth) the generator.

Bef

ore using your generator check that:

• The generator is in good condition and free from any damage.

• The generator is clean and free from fuel or oil spillage.

• The generator is correctly located for use (See page 4).

• The fuel system and connectors are intact and there is no leakage.

NOTE: Always use a funnel to fill the fuel tank so as to avoid accidental

spillage of fuel. If fuel is spilled it must be removed from the unit

before attempting to start the engine.

EARTH POINT

Always connect the generator to an

earth point. The earth terminal is

shown on the right.

WARNING: ENSURE THERE IS ADEQUATE FUEL IN THE TANK WHEN USING

THE GENERATOR. RUNNING OUT OF FUEL OR STOPPING THE ENGINE

SUDDENLY WITH A LOAD CONNECTED COULD CAUSE SERIOUS DAMAGE.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Clarke IG1000 Specifications Page 8