Clarke AP14GFM User Manual download pdf (Page 4)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Always ensure there is adequate ventilation. Do not spray or handle paint

in enclosed areas.

3. Never spray close to any source of heat or flame.

4. Always wear a suitable approved breathing mask when spraying, to

protect against inhalation of paint spray or fumes. An air feed mask may

be required when sprayingsome toxic types of paint. If in doubt, check

with the paint manufacturer.

5. Always check the manufacturer’s data sheets for the paint products being

sprayed for any particular hazards and follow the manufacturer’s

instructions. Take particular care if spraying isocyanate paints. Products

used in a spray gun may be covered by COSHH Regulations.

6. Always disconnect the spray gun from the air supply when it is not in use

and before any disassembly.

7. Never spray paint towards people or animals.

8. In the case of injury, seek expert medical advice immediately. Never

smoke while spraying or preparing paints, or spray near a naked flame,

heat source and electrical sparks. Many paints are flammable.

9. Never tamper with the product or modify it in any way, as this could prove

to be dangerous and will invalidate the guarantee. Only use the product

for the purpose for which it is intended.

10. When replacing parts, only use those supplied by Clarke International as

per the parts list.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Clarke AP14GFM User Manual Page 4