Clarke Raider 105 Operations Instructions download pdf (Page 8)

SHUTTING DOWN THE COMPRESSOR

1. Press down on the on/off button to

turn the compressor OFF.

2. Set the pressure regulator to its

lowest setting, i.e. fully

anticlockw

ise (if fitted) .

3. Trigger the equipment (spraygun,

air

tool etc), to release air from the

air hose before disconnecting the

hose from the machine.

4. Disconnect the compressor for the

mains supply.

• You should never leave the compressor air tank unattended while

under press

ure.

• Always release the pressure from the tank when not in use or prior to

storage, as described in the following section.

DRAINING THE TANK

1. Turn the compressor off and

disconnect from the mains

sup

ply.

• Place a suitable container

beneath the compressor to

catch any condensation.

2. Carefully undo the drain valve, If

you hear a hissing noise, this is the

sound of the reservoir

depressurising.

3. When the tank has drained fully, re-tighten the drain valve.

CAUTION: YOU MUST DRAIN THE TANK AFTER USE AND BEFORE YOU

STORE YOUR COMPRESSOR..

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Clarke Raider 105 Operations Instructions Page 8