Clarke Raider 105 Operations Instructions download pdf (Page 10)

MAINTENANCE

CHECKING THE OIL LEVEL (DAILY)

Ensure the oil level is between the min and max marks on the dipstick and top-

up if necessary.

• Only use SAE30 compressor oil, available from your Clarke Dealer

(Part No. 3050801).

DRAIN THE TANK (DAILY)

After use, always open the drain valve to ensure that any condensate is

drained off.

CLEANING THE AIR INTAKE FILTER (MONTHLY)

The air intake filter should be inspected on a MONTHLY basis, and more often

in dusty conditions,

Air Filter Cover

Pull the filter cover away from the

compressor as shown.

Air Filter

Remove the sponge filter from the

filter cover.

3. Clean the sponge and the filter

cover using a soft brush.

• If necessary, the sponge filter

may be g

ently washed in warm

soapy water,.

• Rinse and allow the filter to dry

thoroughly before refitting.

4. Ensure that the filter and filter cover is

then placed back into its original

position.

• If any part of the filter is damaged, you should obtain a

placement.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Clarke Raider 105 Operations Instructions Page 10