Clarke Raider 105 Operations Instructions download pdf (Page 12)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DRAINING THE RESERVOIR

1. Turn the compressor off and

disconnect from the power

sup

ply.

2. Put a container below the drain

lve to collect the condensate.

3. Open the drain valve slowly.

• Condensation will drain from

the reservoir

4. Close the drain valve when the

reservoir has fully drained.

RESET BUTTON

This compressor has a thermal

overload device.

If the motor gets too hot, the thermal

overload device cuts the power

which prevents damage to the motor.

If the thermal overload device

operates, let the motor cool down for

5 minutes and push the reset button.

If you start the compressor and the

overload cutout operates again, stop

the compressor and disconnect from the power supply and have your

compressor examined by a qualified service agent.

CAUTION: YOU MUST DRAIN THE RESERVOIR AFTER EACH DAYS USE AND

BEFORE YOU PUT YOUR COMPRESSOR INTO STORAGE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Clarke Raider 105 Operations Instructions Page 12