Clarke Raider 105 Operations Instructions download pdf (Page 10)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHECK THE SAFETY VALVE

To make sure that the safety valve works correctly:

1. Pull on the ring attached.

• Air will be released when you

pull on the ring and

stop when

released.

2. If the valve does not operate in

this way, do not use the

compressor. The compressor must

be repaired by a qualified service

agent.

SET THE OUTLET PRESSURE

When viewed from the front, the left hand outlet valve is adjustable. The right

hand outlet valve will only supply the full reservoir pressure and is not

adjustable.

1. Use the pressure regulator to set

the output pressure of the left

hand outlet valve.

• Turn clockwise to increase the

pressure.

• Turn counterclockwise to

decrease the pressure.

GAUGES

1. The reservoir pressure gauge

shows the current pressure in the

reservoir.

2. The outlet pressure gauge shows

the ‘user

set’ outlet pressure. This

can be adjusted as shown above.

WARNING: DO NOT REMOVE OR TRY TO ADJUST THE SAFETY VALVE.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Clarke Raider 105 Operations Instructions Page 10