Clarke BOOST 28 Operator's Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
ENGLISH
24
Operators Manual - FOCUS
®
II L17 - S20 - L20 - L20 Cyl. - BOOST
®
L20
SQUEEGEE CLEANING
NOTE
The squeegee must be clean and its blades must be in
good conditions in order to get a good drying.
CAUTION!
It is advisable to wear protective gloves when
cleaning the squeegee because there may be sharp
debris.
Drive the machine on a level oor.
Turn the ignition key (A, Fig. 25) to "0".
Lower the squeegee (B) with the lever (C).
Loosen the knobs (D) and remove the squeegee (B).
Disconnect the vacuum hose (E) from the squeegee.
Clean the steel or the aluminum squeegee (Fig. 26). Clean
the compartments (A) and the hole (B) especially. Check the
front blade (C) and the rear blade (D) for integrity, cuts and
tears; if necessary replace them (see the procedure in the
following paragraph).
Assemble the squeegee in the reverse order of disassembly.
1.
2.
3.
4.
5.
6.
7.
Figure 25
Figure 26
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 141 142

Comments to this Manuals

No comments