Clarke CAT47 Specifications download pdf (Page 5)

INTRODUCTION

The CAT47 is a professional, 2-hammer, 1” square drive impact wrench with an

extended anvil.

1. 1” Square Socket Drive

2. Side handle

3. Forward/Reverse clutch

4. Airline Connection

5. Trigger

1 2 3 4 5

AIR SUPPLY REQUIREMENTS

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU

ARE THOROUGHLY FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE

USE OF COMPRESSORS AND COMPRESSED AIR SUPPLY.

• Use only clean, dry, regulated compressed air as a power source.

• Air compressors used with the tool must comply with the appropriate

European Community safety directives.

• A build-up of moisture in the air compressor will accelerate wear and

corrosion in the moving parts. Ensure any moisture is drained from the

compressor daily, and the inlet filter is kept clean.

• If an unusually long air hose is required, (over 8 metres), line pressure may

need to be increased.

• Never exceed the maximum operating pressure for the tool.

• The air hose must be rated at least 150% of the maximum operating

pressure of the tool.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Clarke CAT47 Specifications Page 5