Clarke CON1020 Specifications download pdf (Page 4)

GENERAL SAFETY PRECAUTIONS

WARNING:

As with all machinery, there are certain hazards involved with their operation

and use. Exercising respect and caution will considerably lessen the risk of

personal injury. However, if normal safety precautions are overlooked or

ignored, personal injury to the operator or damage to property, may result.

1. ALWAYS Learn the machines’ applications, limitations and the specific potential

hazards peculiar to it. Read and become familiar with the entire

operating manual.

2. ALWAYS use a face or dust mask if operation is particularly dusty.

3. ALWAYS check for damage. Before using the machine, any damaged

part, should be checked to ensure that it will operate properly, and

perform its intended function. Check for alignment of moving parts,

breakage of parts, mountings, and any other condition that may

affect the machines’ operation. Any damage should be properly repaired

or the part replaced. If in doubt, DO NOT use the machine. Consult your local dealer.

4. ALWAYS disconnect the tool/machine from the power supply before servicing and

when changing accessories.

5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.

Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.

6. ALWAYS keep work area clean. Cluttered areas and benches

invite accidents.

7. ALWAYS ensure that adequate lighting is available. A

minimum intensity of 300 lux should be provided. Ensure

that lighting is placed so that you will not be working in your

own shadow.

8. ALWAYS keep children away. All visitors should be kept a

safe distance from the work area, especially whilst operating

the machine.

9. ALWAYS maintain machine in top condition. Keep tools/machines

clean for the best and safest performance. Follow maintenance

instructions.

10. ALWAYS handle with extreme care do not carry the tool/machine

by its’ electric cable, or yank the cable to disconnect it from the

power supply .

11. ALWAYS ensure the switch is off before plugging in to mains. Avoid accidental

starting.

12. ALWAYS concentrate on the job in hand, no matter how trivial it may

seem. Be aware that accidents are caused by

carelessness due to familiarity.

13. ALWAYS keep your proper footing and balance at all

times, don’t overreach. For best footing, wear rubber

soled footwear. Keep floor clear of oil, scrap wood, etc.

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Clarke CON1020 Specifications Page 4

Comments to this Manuals

Related products and manuals for Power planers Clarke CON1020