Clarke CAT131 Operations Instructions download pdf (Page 12)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

STORAGE

If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of

Clarke air line oil into the air inlet, and run the tool for 5 seconds in order to

lubricate the internal parts.

When not in use, disconnect from air supply, clean & store in a safe, dry place.

SPECIFICATION

Please note that the details and specifications contained herein are correct

at the time of going to print. However Clarke International reserve the right to

change specifications at any time without prior notice.

Model Number CAT131/CAT132

Part Number(s) 3120145 / 3120146

Min. Hose Size (ID) 3/8” BSP

Max Operating Pressure 90 psi (6.2 bar)

Air Consumption 18 cfm (max @90psi) average 6.5 cfm

Max No Load Speed 7000 rpm @ 90psi

Max Torque 680 Nm (500 ft/lb)

Air Inlet Size 1/4“BSP

Sound Pressure Level (LpA dB) 87 dB(A)

Sound Power Level (LwA dB) 98 dB(A)

Vibration Levels

4.35 m/s

(uncertainty factor K= 1.5m/s

Weight(s) 2.6 kg (CAT131)

4.2 kg complete (CAT132)

Wrench Dimensions (L x W x H) 210 x 190 x 90 mm

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Clarke CAT131 Operations Instructions Page 12