Clarke IG2200 Specifications download pdf (Page 8)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

UNPACKING AND ASSEMBLY

Unpack your Generator and check the following items are present. Should

there be any missing or damaged during transit contact your Clarke dealer

immediately.

• 1 x Inverter Generator

• 1 x Spark Plug Box Spanner

• 1 x Screwdriver/Tommy Bar

• 1 x Container with Spout for Oil Filling

• 1 x Operating & Instruction Manual

• 1 x 12V Battery Connector Lead

• 1 x Oil Drain Tube

BEFORE USING THE GENERATOR

IMPORTANT: Generators should ALWAYS be earthed. Make sure you ground

(earth) the generator.

Bef

ore using your generator check that:

• The generator is in good condition and free from any damage.

• The generator is clean and free from fuel or oil spillage.

• The generator is correctly located for use (See page 4).

• There is no leakage.

NOTE: To avoid accidental spillage of fuel, always use a funnel to fill the

fuel tank. If fuel is spilled it must be removed from the unit before

attempting to start the engine.

EARTH POINT

Always connect the generator to an

earth point. The earth terminal is

shown on the right.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Clarke IG2200 Specifications Page 8