Clarke INDY OIL FREE Specifications Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
Safety Precautions
WARNING!
Compressed air can be dangerous.
Follow these safety instructions carefully.
Never direct a jet of compressed air at people or animals, or spray
paint towards people or animals.
Use appropriate protective equipment, such as Clarke safety-
goggles or glasses, dust masks, ear defenders etc. when using
compressed air tools.
Air compressors work at high pressure. Inspect equipment and hoses
regularly, checking for any damage or leaks. Have any damage
properly repaired before using the machine again.
Do not operate the compressor with any guards removed.
Do not adjust or tamper with the safety valve in any way. The maximum
working pressure (115 psi - approximately 8 bar) is clearly marked on
the compressor and air receiver.
The compressor will become hot during operation. Do not touch the
cylinder head or discharge pipe while the compressor is in use.
Always close the air outlet valve and release any pressure from the air
hose (by operating the tool briefly) before disconnecting any hoses
or tools.
When paint spraying:
Always wear a suitably approved breathing mask when paint
spraying, to protect against inhalation of paint spray or fumes.
An airfeed mask may be required when spraying some types of paint.
If in doubt, check the paint manufacturers instructions.
Make sure there is adequate ventilation. Do not spray in confined or
enclosed areas.
Many paints are flammable. Do not smoke while spraying or preparing
paints, or spray near a naked flame or heat source.
- 4 -
-17 -
PARTS LIST (Compressor)
No Description Qty No Description Qty
1 Screw 4 28 Hose Adapter 1
2 Compressor Head 1 31 Hose 1
3 Gasket 1 33 Pressure Gauge 1
4 Valve 1 34 Disk 1
5 Valve Plate 1 35 Screw 1
6 Gasket 1 36 Filter retainer 1
7 Screw 1 37 Air Filter 1
8 Piston Segment 1 38 Motor 1
9 Con-Rod 1 39 Bearing 1
10 Screw 4 40 On/Off Press Rel Valve 1
11 Crankcase 1 41 Pressure Gauge 1
12 Eccentric Shaft 1 42 Valve Block 1
13 Screw 4 43 Hose adapter 1
14 Base Plate 1 44 Pressure Rel Valve 1
15 Screw 1 45 Olive 1
17 Fan 1 46 Hose Connector 1
18 Motor Shaft 1 47 Hose 1
19 Capacitor 1 48 Hose Clamp 1
20 Plastic Cover 1 49 Hose 1
21 Bayonet Conn Nut 1 50 Power Cable 1
22 Tap 1 51 Cable 1
25 Pressure Regulator Assy 1
Page view 3
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments