Clarke Ultra Speed Burnisher User Manual download pdf

Mercury Floor Machines, Inc.

New Equipment Warranty

Limited Warranty

Mercury Floor Machines, Inc. warrants new equipment against defects in material and

workmanship under normal use and service to the original purchaser. Any statutory implied

warranties, including any warranty of merchantability or tness for a particular purpose, are

expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be

liable for any other damages, including but not limited to indirect or special consequential damages

arising out of or in connection with the furnishing, performance, use or inability to use the machine.

This warranty shall be the exclusive remedy of the purchaser. The warranty period is subject to the

conditions stated below.

5 Years - Motor and Chassis, 1 Year - Service Labor

Mercury Floor Machines, Inc. warrants electric motors and chassis components on this machine

to be free from defects in material and workmanship, under normal use and service for ve (5)

years to the original purchaser. Parts replaced or repaired under this warranty are warranted for

the remainder of the original warranty period. Service labor charges are covered for one (1) year

from the date of purchase, when performed by a Mercury Floor Machines, Inc.-authorized service

provider. Freight charges to and from this service provider will be covered for ninety (90) days

from the purchase date. After this ninety (90) day period, these freight charges will be paid by the

equipment owner. Travel expenses are not covered.

Wear Items on all Machines

Critical Wear Items - bearings, capacitors, clutches, pulleys, rectiers, relays, switches, wheels,

tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.

Normal Wear Items - belts, brushes, bumpers, capacitors, carbon brushes, casters, clutches, cords,

nishes, gaskets, rectiers, switches, squeegees, bearings, pulleys, relays, actuating cables, wheels,

and tires will be warranted for manufacturing defects for ninety (90) days from the purchase date.

All warranties of motors and associated components will be voided: if the machine is used as a

oor sander; if the machine is serviced by anyone other than a Mercury Floor Machines, Inc.-

authorized service provider; if the machine is mechanically modied; if a 2000 RPM model is

operating without the front wheel assembly attached; if a machine is operated when not operating

properly; or if the machine is misused or abused.

The warranty starts on the purchase date by the original purchaser from Mercury Floor Machines,

Inc. subject to proof of purchase. The Machine Registration Card must be completed and returned

immediately at the time of purchase. If proof of purchase cannot be identied, the warranty start

date is ninety (90) days after the inventory stocking date at the Mercury Floor Machines, Inc.

warehouse.

Mercury Floor Machines, Inc.

110 South Van Brunt Street

Englewood, NJ 07631

Phone: (201) 568-4606

Toll Free: (888) 568-4606

Fax: (201) 568-7962

www.mercuryoormachines.com

Important Information and Safety Instructions

Serial No:

Ultra D.C. High-Speed BurnisheR

5 Apron Sizes

Fully Adjustable

Balanced Design

All Metal Chassis

Quiet Motor

Safe & Easy to Use

YOUR

MACHINE

ONLINE!

Safety, Operation and Maintenance

Manual with Parts List

Please read before use!

1.5 HP

1170, 1500 or 2000 RPM

19”, 20” and 21” Apron Sizes

1 2 3 4 5 6

Summary of Contents

Page 1 - 1170, 1500 or 2000 RPM

Mercury Floor Machines, Inc.New Equipment WarrantyLimited WarrantyMercury Floor Machines, Inc. warrants new equipment against defects in material and

Page 2 - 8.0 Machine Parts List

1.0 Safe Operating ConditionsREAD THIS MANUAL BEFORE USING BURNISHER. KNOW THE PROPER OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS EQ

Page 3 - 1.2 Grounding Instructions

1.1 Electrical PowerThis burnisher operates on a 13 amp nominal 115 V, 60 Hz, A.C. power circuit. (Motors may be custom wired at the factory for 220

Page 4 - 6.0 Handle Parts List

(4) Ultra High-Speed BurnisherUltra High-Speed Burnisher (9)1. Mount the handle to the chassis:

Page 5 - 2.2 Inspect the Pad Driver

2.1 Attach the Power CordThe triple-wire grounded power cord has been factory-installed into the handle tube. A exible rubber cable connector (11)

Page 6 - 3.0 Operating Tips

3.2 TransportTo transport this burnisher from the janitor’s closet to the work area:• Lock the handle in the “up” position. Wind the cord around th

Comments to this Manuals

No comments

Clarke Ultra Speed Burnisher User Manual

Browse online or download User Manual for Floor Machine Clarke Ultra Speed Burnisher. Ultra D.C. High-Speed BurnisheR

Summary of Contents

Comments to this Manuals

Related products and manuals for Floor Machine Clarke Ultra Speed Burnisher